Dry Drawing Lubricants

PANLUBE S1500

For high speed and clean surface

borax free sodium lubricant

High content of stearic acid. To be used in all the dies for high speed if a clean surface is required.

Surface preparation:

  1. zinc coating

PANLUBE S1503

For high speed and clean surface

borax free sodium lubricant

High content of stearic acid. To be used in all the dies for high speed if a clean surface is required.

Surface preparation:

  1. zinc coating

PANLUBE S400

For roping and spring wire

Calcium lubricant with medium content of fatty acids

To be used in the first pass of spring wire followed by S1500, S1501, S1503, on the folowing dies.

On all the passes for roping wire.

Surface preparation:

  1. zinc coating

 

PANLUBE S431

For roping and spring wire

calcium lubricant with medium content of fatty acids

To be used in the first pass for spring wire followed by S1500, S1501, S1503 on the following dies. On all the passes for roping wire.

Surface preparation:

  1. zinc coating

PANLUBE S1501

High melting point

low borax sodium lubricant

High melting point lubricant.

Surface preparation:

  1. zinc coating

Wet Drawing Lubricants

PANLUBE L3000H

To be used for medium and high carbon

emulsifiable oil for high carbon galvanized wire

  1. To be used for medium and high carbon either phosphate coated or galvanized.Surface preparation:
    1. galvanized wire (D.A.G.)
    2. phosphate coated

PANLUBE L3046

To be used for medium and high carbon

emulsifiable oil for high carbon galvanized wire

To be used for medium and high carbon either phosphate coated or galvanized.

Surface preparation:

  1. galvanized wire (D.A.G.)
  2. phosphate coated

PANLUBE L3048

To be used for medium and high carbon

Emulsifiable oil for high carbon galvanized wire

To be used for medium and high carbon either phosphate coated or galvanized.

Surface preparation:

  1. galvanized wire (D.A.G.)
  2. phosphate coated

Non Reactive Pre-Coatings

PANCOVER 4700

For long storage

chloride and borax free

Borax free pre-coating product for stainless steel wires, bars,tubes and profiles.

Special additives have been included to enhance the adherence to the rod/wire surface
The coating film has a low tendency to moisture pick-up enabling long storage before final use.

Surface preparation:

1. acid pickling

2. shot blasting

3.molten salts descaling

 

PANCOVER 4730

For long storage

chloride free

Special additives have been included to enhance the adherence to the rod/wire surface
The coating film has a low tendency to pick up moisture enabling long storage before final use.
This product can be used either for stainless steel or carbon steel, batch or in-line treatment, specially indicated for mattress spring wire.

Surface preparation:

1. acid pickling

2. shot blasting

3.molten salts descaling

 

PANCOVER 4750

For long storage

low borax pre-coating

Low borax pre-coating product. The coating film has a low tendency to moisture pick-up enabling long storage before final use.

Surface preparation:

1. acid pickling
2. shot blasting

 

PANCOVER 4760

To avoid the presence of boron in waste water

borax free product, special additives have been included to enhance the adherence to the rod/wire surface.

Designed to avoid the presence of boron in waste water. It can be used either on rod or fine wire.

Surface preparation:

1. acid pickling

2. shot blasting

 

PANCOVER 4770

For high humidity environment

very low hygroscopicity, low borax

Particularly indicated for high humidity enviromment.

Surface preparation:

1. acid pickling

2. shot blasting

 

PANCOVER 4780

For the in-line treatment of multi-wire coating

borax free pre-coating compound , water soluble

It is used for the in-line treatment of multi-wire coating after in-line phosphate.

Surface preparation:

  1. Shot blasting
  2. Acid pickling and phosphate coating