For medium speed drawing.

The rod preparation can be

1. by mechanicals descaling
2. by brushing
3. by abrasive sanding
4. by acid picking

The rod preparation can be pre-coated by

1. lime
2. water soluble carriers

It is suitable for pressure dies.

For medium and high speed drawing.

The rod preparation can be

1. by mechanical descaling
2. by brushing
3. by abrasive sanding
4. by acid picking

The rod preparation can be pre-coated by

1. lime
2. water soluble carriers

It is suitable for pressure dies.

For medium and high speed drawing.

The rod preparation can be

1. by mechanical descaling
2. by brushing
3. by abrasive sanding
4. by acid picking

The rod preparation can be pre-coated by

1. lime
2. water soluble carriers

It is suitable for pressure dies.

For high speed drawing.

The rod preparation can be

1. by mechanical descaling
2. by brushing
3. by abrasive sanding
4. by acid picking

The rod preparation can be pre-coated by

1. lime
2. water soluble carriers

It is suitable for pressure dies.

Heavy coating for high speed drawing.

The rod preparation can be

1. by mechanical descaling
2. by brushing
3. by abrasive sanding
4. by acid picking

The rod preparation can be pre-coated by

1. lime
2. water soluble carriers

It is suitable for pressure dies.

For high speed drawing.

The rod preparation can be

1. by mechanical descaling
2. by brushing
3. by abrasive sanding
4. by acid picking

The rod preparation can be pre-coated by

1. lime
2. water soluble carriers

It is suitable for pressure dies.

For high speed drawing, high melting point.

The rod preparation can be

1. by mechanical descaling
2. by brushing
3. by abrasive sanding
4. by acid picking

The rod preparation can be pre-coated by

1. lime
2. water soluble carriers

It is suitable for pressure dies.

For very high speed starting from belt descaler and pre-coated rod. Suitable for in-line machines. To be used on the first block followed by a sodium lubricant.

The rod preparation can be:

1. by mechanical descaling
2. by brushing
3. by abrasive sanding
4. by acid picking

The rod preparation can be pre-coated by:

1. lime
2. water soluble carriers

It is suitable for pressure dies.

No residual in the pickling bath after annealing.

The rod preparation can be

1. by mechanical descaling
2. by brushing
3. by abrasive sanding
4. by acid picking

The rod preparation can be pre-coated by

1. lime
2. water soluble carriers

It is suitable for pressure dies.

Contains E.P. additives. It is suitable for machines with limited cooling.

The rod preparation can be

1. by mechanical descaling
2. by brushing
3. by abrasive sanding
4. by acid picking

The rod preparation can be pre-coated by

1. lime
2. water soluble carriers

It is suitable for pressure dies.

For the final dies or for redrawing of fine wire, clean nail wire.

Sodium lubricants are generally used after a calcium lubricant to obtain a clean surface. They can be used directly from the first pass on coated rod or for big diameters.

Suitable for big diameters, clean surface.

The rod preparation can be

1. by mechanical descaling
2. by brushing
3. by abrasive sanding
4. by acid picking

The rod preparation can be pre-coated by

1. lime
2. water soluble carriers

it is suitable for pressure dies.

To be used for big diameters on 2-5 steps when a low residual is required on the finished wire.

The rod preparation can be

1. by mechanical descaling
2. by brushing
3. by abrasive sanding
4. by acid picking

The rod preparation can be pre-coated by

1. lime
2. water soluble carriers

It is suitable for pressure dies.

To be used for big diameters on 2-5 steps when a low residual is srequired on the finished wire.

The rod preparation can be

1. by mechanical descaling
2. by brushing
3. by abrasive sanding
4. by acid picking

The rod preparation can be pre-coated by

1. lime
2. water soluble carriers

It is suitable for pressure dies.

Suitable for big diameters for the production of clean wire.

Sodium lubricants are generally used after a calcium lubricant to obtain a clean surface. They can be used directly from the first pass on coated rod or for big diameters.

Used after a calcium lubricant to reduce the final coating or from the first pass with lime coated rod.
Surface preparation:

Sodium lubricants are generally used after a calcium lubricant to obtain a clean surface. They can be used directly  from the first pass on coated rod or for big diameters.

For the production of fine wire at very high speed, up to 40 m/s.

Sodium lubricants are generally used after a calcium lubricant to obtain a clean surface. They can be used directly from the first pass on coated rod or for big diameters.