Wet Drawing Lubricants
PANLUBE L3134
For fine wires
very low viscosity oil
Calibration of fine wires in-line to the annealing furnace.
Surface preparation:
- wet drawing
PANLUBE L3220CF
For fine wires
chlorine free low viscosity oil
To be used for the wet drawing in the production of fine wire.
Surface preparation:
- wet drawing
- not required or PANCOVER coating for heavy duty application
PANLUBE L3012
For flat strip
water soluble semisynthetic oil
For stainless steel rolling for flat strip production.
Very easy to be removed with the standard U.T.S. or electrolytic systems.
Surface preparation:
- Annealed
PANLUBE L3104CF
For in-line calibration
chlorine free
Recommended for the calibration in-line to the annealing furnace.
Surface preparation:
- annealed
PANLUBE G4200
For one pass heavy reduction
viscous paste with E.P. additives
Grease developed to be used on a single pass, providing bright finishing and residual film easy to be removed.
Surface preparation:
- not required or PANCOVER coating for heavy duty application
PANLUBE L3803
For rolling operation for profiles
water soluble oil
to be used at high concentrationfor rolling operation for profilles.
Surface preparation:
- tube forming by rolling
PANLUBE L3254
For round or profiled bars
medium viscous oil with high content of E.P. additives
Calibration for single or multipass drawing with high reduction of round profiled bars.
Surface preparation:
- pre-coating by PANCOVER 4700, 4730, 4770, required only for heavy duty applications (deep forming, cold heading, profiles)
PANLUBE L3252
For round or profiled bars
high vicious oil with high content of E.P. additives
Calibration for single or multipass drawing with high reduction or round profiled bars.
Surface preparation:
- pre-coating by PANCOVER 4700,4730,4770, required only for heavy duty applications (deep forming, cold heading, profiles)
PANLUBE L3251
For round or profiled bars
very viscous oil with high content of E.P. additives
Calibration for single or multipass drawing with high reduction of round or profiled bars.
Surface preparation:
- pre coating by PANCOVER 4700,4730,4770, required only for heavy duty applications (deep forming, cold heading, profiles)