Low Carbon
Dry Drawing Lubricants
PANLUBE S212
For multiple die at high speed
calcium-sodium lubricant with low fat content
Partially water soluble.
For better cleaning on the final dies a Sodium lubricant is recommended (Panlube S 1400).
1. acid pickling and lime or pre-coating (PANCOVER)
2. mechanical descaling
3. mechanical descaling and brushing
4. abrasive belt descaling
5. in-line shot blasting (Deblasting process).
The final cleaning is generally obtained by a degreasing solution in the last die box using a sigle or duble rotating die. (See our Rotating Die Box LPL 43/2).
PANLUBE S466
For multiple die at high speed
calcium-sodium lubricant with low fat content
Partially water soluble.
It can be used for multiple die at high speed. For better cleaning on the final dies a Sodium lubricant is recommended (Panlube S 1400).
1. acid pickling and lime or pre-coating (PANCOVER)
2. mechanical descaling
3. mechanical descaling and brushing
4. abrasive belt descaling
5. in-line shot blasting (Deblasting process).
The final cleaning is generally obtained by a degreasing solution in the last die box using a sigle or duble rotating die. (See our Rotating Die Box LPL 43/2).
PANLUBE S616
For multiple die at high speed
calcium-sodium lubricant with low fat content
Partially water soluble.
It can be used for multiple die at high speed.
For better cleaning on the final dies a Sodium lubricant is recommended (Panlube S 1400).
1. acid pickling and lime or pre-coating (PANCOVER)
2. mechanical descaling
3. mechanical descaling and brushing
4. abrasive belt descaling
5. in-line shot blasting (Deblasting process).
The final cleaning is generally obtained by a degreasing solution in the last die box using a sigle or duble rotating die. (See our Rotating Die Box LPL 43/2).
PANLUBE S622
For multiple die at high speed
calcium - sodium lubricant with low fat content
Partially water soluble. It can be used for multiple die at high speed.
For better cleaning on the final dies a Sodium lubricant is recommended (Panlube S 1400).
1. acid pickling and lime or pre-coating (PANCOVER)
2. mechanical descaling
3. mechanical descaling and brushing
4. abrasive belt descaling
5. in-line shot blasting (Deblasting process).
The final cleaning is generally obtained by a degreasing solution in the last die box using a sigle or duble rotating die. (See our Rotating Die Box LPL 43/2).
PANLUBE S624
For multiple die at high speed
calcium-sodium lubricant with low fat content
Partially water soluble.
For better cleaning on the final dies a Sodium lubricant is recommended (Panlube S 1400).
1. acid pickling and lime or pre-coating (PANCOVER)
2. mechanical descaling
3. mechanical descaling and brushing
4. abrasive belt descaling
5. in-line shot blasting (Deblasting process).
The final cleaning is generally obtained by a degreasing solution in the last die box using a sigle or duble rotating die. (See our Rotating Die Box LPL 43/2).
PANLUBE S933
For big diameters and bright finishing
Calcium - sodium lubricant with medium fat content
Recommended for big diameters, bright finishing, rust protection.
Surface preparation:
1. acid pickling and lime or pre-coating (PANCOVER)
2. mechanical descaling
3. mechanical descaling and brushing
4. abrasive belt descaling
5. in-line shot blasting (Deblasting process).
The final cleaning is generally obtained by a degreasing solution in the last die box using a sigle or duble rotating die. (See our Rotating Die Box LPL 43/2).
PANLUBE S940
For big diameters and bright finishing
calcium - sodium lubricant with medium fat content
Recommended for big diameters, bright finishing, rust protection.
Surface preparation:
- acid pickling and lime or pre-coating (PANCOVER)
- mechanical descaling
- mechanical descaling and brushing
- abrasive belt descaling
- in-line shot blasting (deblasting process)
The final cleaning is generally obtained by a degreasing solution in the last die box using a single or double rotating die. (See our rotating die box LPL 43/2).
PANLUBE S1030
For high speed drawing
calcium-sodium lubricant with high fat content
Recommended for high speed drawing, to be used on the first dies, followed by S1400 or S1531.
Surface preparation:
1. acid pickling and lime or pre-coating (PANCOVER)
2. mechanical descaling
3. mechanical descaling and brushing
4. abrasive belt descaling
5. in-line shot blasting (Deblasting process).
The final cleaning is generally obtained by a degreasing solution in the last die box using a sigle or duble rotating die. (See our Rotating Die Box LPL 43/2).
PANLUBE S1400
Fully water soluble
borax free sodium lubricant
Fully water soluble, it can be used for all dies in case of lime coating, or after a calcium-sodium lubricant in case of mechanical descaling.
1. acid pickling and lime or pre-coating (PANCOVER)
2. mechanical descaling
3. mechanical descaling and brushing
4. abrasive belt descaling
5. in-line shot blasting (Deblasting process).
The final cleaning is generally obtained by a degreasing solution in the last die box using a sigle or duble rotating die. (See our Rotating Die Box LPL 43/2).
PANLUBE S1440
Fully water soluble
low borax sodium lubricant
Fully water soluble, it can be used for all dies in case of lime coating, or after a calcium-sodium lubricant in case of mechanical descaling.
1. acid pickling and lime or pre-coating (PANCOVER)
2. mechanical descaling
3. mechanical descaling and brushing
4. abrasive belt descaling
5. in-line shot blasting (Deblasting process).
The final cleaning is generally obtained by a degreasing solution in the last die box using a sigle or duble rotating die. (See our Rotating Die Box LPL 43/2).
PANULBE S1450
Fully water soluble
borax free sodium lubricant with medium fat content
Fully water soluble.
It can be used for all dies in case of lime coating or after a calcium-sodium lubricant in case of mechanical descaling.
1. acid pickling and lime or pre-coating (PANCOVER)
2. mechanical descaling
3. mechanical descaling and brushing
4. abrasive belt descaling
5. in-line shot blasting (Deblasting process).
The final cleaning is generally obtained by a degreasing solution in the last die box using a sigle or duble rotating die. (See our Rotating Die Box LPL 43/2).
PANLUBE S1531
Fully water soluble
low borax sodium lubricant with high fat content
Fully water soluble, it can be used for all dies in case of lime coating or after a calcium-sodium lubricant in case of mechanical descaling.
1. acid pickling and lime or pre-coating (PANCOVER)
2. mechanical descaling
3. mechanical descaling and brushing
4. abrasive belt descaling
5. in-line shot blasting (Deblasting process).
The final cleaning is generally obtained by a degreasing solution in the last die box using a sigle or duble rotating die.
(See our Rotating Die Box LPL 43/2).
PANLUBE S2000
For the production of clean wire
calcium-sodium lubricant
For the production of clean wire.
1. acid pickling and lime or pre-coating (PANCOVER)
2. mechanical descaling
3. mechanical descaling and brushing
4. abrasive belt descaling
5. in-line shot blasting (Deblasting process).
The final cleaning is generally obtained by a degreasing solution in the last die box using a sigle or duble rotating die. (See our Rotating Die Box LPL 43/2).
Wet Drawing Lubricants
PANLUBE G4210
For bright finishing and corrosion protection
jelly paste
Special paste for one die application on lime coated rod, excellent bright finishing and good protection against corrosion.
1. acid pickling and lime or pre-coating (PANCOVER)
2. mechanical descaling
3. mechanical descaling and brushing
4. abrasive belt descaling
5. in-line shot blasting (Deblasting process).
The final cleaning is generally obtained by a degreasing solution in the last die box using a sigle or duble rotating die.
(See our Rotating Die Box LPL 43/2).
PANLUBE G4218
For bright finishing and corrosion protection
jelly paste
Special paste for one die application on lime coated rod, excellent bright finishing and good protection against corrosion.
1. acid pickling and lime or pre-coating (PANCOVER)
2. mechanical descaling
3. mechanical descaling and brushing
4. abrasive belt descaling
5. in-line shot blasting (Deblasting process).
The final cleaning is generally obtained by a degreasing solution in the last die box using a sigle or duble rotating die. (See our Rotating Die Box LPL 43/2).
PANLUBE G4260
For heavy operation on one die
light green paste
High lubrication paste to be used for heavy operation, one step.
Surface preparation:
- acid pickling and lime or pre-coating (PANCOVER)
- mechanical descaling
- mechanical descaling and brushing
- abrasive belt descaling
- in-line shot blasting (Deblasting process)
The final cleaning is generally obtained by a degreasing solution in the last die box using a single or double rotating die.
(See our Rotating Die Box LPL 43/2)
PANLUBE L3005
For fine wire with bright finishing
liquid lubricant soluble in water
For wet drawing of fine wire with bright finishing.
Surface preparation:
- acid pickling and lime or pre-coating (PANCOVER)
- mechanical descaling
- mechanical descaling and brushing
- abrasive belt descaling
- in-line shot blasting (Deblasting process)
The final cleaning is generally obtained by a degreasing solution in the last die box using a single or double rotating die.
(See our Rotating Die Box LPL 43/2)
PANLUBE L3009
To be added to the final degreasing
liquid lubricants soluble in water
To be added at 5% to the final degreasing solution.
Surface preparation:
- acid pickling and lime or pre-coating (PANCOVER)
- mechanical descaling
- mechanical descaling and brushing
- abrasive belt descaling
- in-line shot blasting (Deblasting process)
The final cleaning is generally obtained by a degreasing solution in the last die box using a single or double rotating die.
(See our Rotating Die Box LPL 43/2)
PANLUBE L3131
For removal of residuals
solvent based lubricant
For removal of the residual lubricant after wet drawing for staple wire.
Surface preparation:
- acid pickling and lime or pre-coating (PANCOVER)
- mechanical descaling
- mechanical descaling and brushing
- abrasive belt descaling
- in-line shot blasting (Deblasting process)
The final cleaning is generally obtained by a degreasing solution in the last die box using a single or double rotating die. (See our Rotating Die Box LPL 43/2)
Non Reactive Pre-Coatings
PANCOVER 4700
For long storage
chloride and borax free
Borax free pre-coating product for stainless steel wires, bars,tubes and profiles.
Special additives have been included to enhance the adherence to the rod/wire surface
The coating film has a low tendency to moisture pick-up enabling long storage before final use.
Surface preparation:
1. acid pickling
2. shot blasting
3.molten salts descaling
PANCOVER 4730
For long storage
chloride free
Special additives have been included to enhance the adherence to the rod/wire surface
The coating film has a low tendency to pick up moisture enabling long storage before final use.
This product can be used either for stainless steel or carbon steel, batch or in-line treatment, specially indicated for mattress spring wire.
Surface preparation:
1. acid pickling
2. shot blasting
3.molten salts descaling
PANCOVER 4750
For long storage
low borax pre-coating
Low borax pre-coating product. The coating film has a low tendency to moisture pick-up enabling long storage before final use.
Surface preparation:
1. acid pickling
2. shot blasting
PANCOVER 4770
For high humidity environment
very low hygroscopicity, low borax
Particularly indicated for high humidity enviromment.
Surface preparation:
1. acid pickling
2. shot blasting
PANCOVER 4760
To avoid the presence of boron in waste water
borax free product, special additives have been included to enhance the adherence to the rod/wire surface.
Designed to avoid the presence of boron in waste water. It can be used either on rod or fine wire.
Surface preparation:
1. acid pickling
2. shot blasting
PANCOVER 4780
For the in-line treatment of multi-wire coating
borax free pre-coating compound , water soluble
It is used for the in-line treatment of multi-wire coating after in-line phosphate.
Surface preparation:
- Shot blasting
- Acid pickling and phosphate coating