Dry Drawing Lubricants

PANLUBE S400

For high speed drawing

Calcium lubricant with medium content of fatty acids

For medium and high drawing speed. On all steps for roping wire before patenting.

For the first dies followed by a sodium lubricant for spring wire.

Surface preparation:

  1. acid pickling, phosphate coating and borax or PANCOVER coating
  2. in-line shot blasting (deblasting process) and PANCOVER borax free coating
  3. mechanical descaling
  4. coil shot blasting and coating
  5. belt descaling and in-line precoating
  6. brushing and in-line coating +C3

 

PANLUBE S405

For high speed drawing

calcium lubricant with medium content of fatty acids

For high drawing speed

Surface preparation:

  1. acid pickling, phosphate coating and borax or PANCOVER coating
  2. in-line shot blasting and PANCOVER borax free coating
  3. mechanical descaling
  4. coil shot blasting and coating
  5. belt descaling and in-line precoating
  6. brushing and in-line coating+C3

PANLUBE S410NS

For high speed drawing

calcium - sodium lubricant with high content of fatty acids, E.P. additives

Suitable for very high speed of mattress spring wire by belt descaling and in-line coating, high performance product on mechanically descaled without coating.

Surface preparation:

  1. acid pickling, phosphate coating and borax or PANCOVER coating
  2. in-line shot blasting (deblasting process) and PANCOVER borax free coating
  3. mechanical descaling
  4. coil shot blasting and coating
  5. belt descaling and in-line precoating
  6. brushing and in-line coating +C3

PANLUBE S1250

For 2nd drawing after patenting

low borax sodium lubricant

To be used for the 2nd drawing after patenting

Surface preparation:

  1. acid pickling, phosphate coating and borax or PANCOVER coating
  2. in-line shot blasting (deblasting process) and PANCOVER borax free coating
  3. mechanical descaling
  4. coil shot blasting and coating
  5. belt descaling and in-line precoating
  6. brushing and in-line coating +C3

 

PANLUBE S1280

For 2nd drawing after patenting

low borax sodium lubricant

To be used for the 2nd drawing after patenting

Surface preparation:

  1. acid pickling, phosphate coating and borax or PANCOVER coating
  2. in-line shot blasting (deblasting process) and PANCOVER borax free coating
  3. mechanical descaling
  4. coil shot blasting and coating
  5. belt descaling and in-line precoating
  6. brushing and in-line coating +C3

 

PANLUBE S604

For big diameters

calcium lubricant

For big diameters to be used on the first dies.

Surface preparation:

  1. acid pickling, phosphate coating and borax or PANCOVER coating
  2. in-line shot blasting and PANCOVER borax free coating
  3. mechanical descaling
  4. coil shot blasting and coating
  5. belt descaling and in-line precoating
  6. brushing and in-line coating+C3

PANLUBE S1440

For fine low residual wire

low borax sodium lubricant with high content of stearic acids, high melting point

For high speeds and fine wire production. Low residual on the wire.

Surface preparation:

  1. acid pickling, phosphate coating and borax or PANCOVER coating
  2. in-line shot blasting (deblasting process) and PANCOVER borax free coating
  3. mechanical descaling
  4. coil shot blasting and coating
  5. belt descaling and in-line precoating
  6. brushing and in-line coating +C3

PANLUBE S613

For heavy drawing operation

calcium lubricant with medium content of fatty acids

Very high coating to be used on heavy drawing operations.

Surface preparation:

  1. acid pickling, phosphate coating and borax or PANCOVER coating
  2. in-line shot blasting (deblasting process) and PANCOVER borax free coating
  3. mechanical descaling
  4. coil shot blasting and coating
  5. belt descaling and in-line preocating
  6. brushing and in-line coating +C3

PANLUBE S451

For phosphate coated wire

calcium lubricant with medium content of fatty acids

For PC wire and high carbon with phosphate coating preparation.

PANLUBE S612

For rod breakdown

calcium lubricant with low content of fatty acids

Product suitable for medium and high drawing speed use.

To be used on first dies with a sodium on the final dies.

High performance drawing lubricant for rod breakdown.

Surface preparation:

  1. acid pickling, phosphate coating and borax or PANCOVER coating
  2. in-line shot blasting and PANCOVER borax free coating
  3. mechanical descaling
  4. coil shot blasting and coating
  5. belt descaling and in-line precoating
  6. brushing and in-line coating+C3

PANLUBE S645

For rod breakdown

calcium lubricant with low content of fatty acids

High lubrification for breakdown of roping wire

Surface preparation:

  1. acid pickling, phosphate coating and borax or PANCOVER coating
  2. in-line shot blasting (deblasting process) and PANCOVER borax free coating
  3. mechanical descaling
  4. coil shot blasting and coating
  5. belt descaling and in-line precoating
  6. brushing and in-line coating +C3

PANLUBE S410

For spring wire with smooth finishing

Calcium lubricant with high content of fatty acids

For the fisrt pass of spring wire for smooth and back finishing.

Surface preparation:

  1. acid pickling, phosphate coating and borax or PANCOVER coating
  2. in-line shot blasting (deblasting process) and PANCOVER borax free coating
  3. mechanical descaling
  4. coil shot blasting and coating
  5. belt descaling and in-line precoating
  6. brushing and in-line coating +C3

 

PANULBE S1504

For spring wire with smooth finishing

borax free sodium lubricant with high content of stearic acids, high melting point

Borax free product for spring wire with smooth finishing.

Surface preparation:

  1. acid pickling, phosphate coating and borax or PANCOVER coating
  2. in-line shot blasting and PANCOVER borax free coating
  3. mechanical descaling
  4. coil shot blasting and coating
  5. belt descaling and in-line precoating
  6. brushing and in-line coating+C3

PANLUBE S1600

For spring wire with smooth finishing

borax free sodium lubricant with high content of stearic acid

For spring wite wth smooth finishing.
Surface preparation:

  1. acid pickling, phosphate coating and borax or PANCOVER coating
  2. in-line shot blasting and PANCOVER borax free coating
  3. mechanical descaling
  4. coil shot blasting and coating
  5. belt descaling and in-line precoating
  6. brushing and in-line coating+C3

Wet Drawing Lubricants

PANLUBE L3000H

To be used for medium and high carbon

emulsifiable oil for high carbon galvanized wire

  1. To be used for medium and high carbon either phosphate coated or galvanized.Surface preparation:
    1. galvanized wire (D.A.G.)
    2. phosphate coated

PANLUBE L3046

To be used for medium and high carbon

emulsifiable oil for high carbon galvanized wire

To be used for medium and high carbon either phosphate coated or galvanized.

Surface preparation:

  1. galvanized wire (D.A.G.)
  2. phosphate coated

PANLUBE L3048

To be used for medium and high carbon

Emulsifiable oil for high carbon galvanized wire

To be used for medium and high carbon either phosphate coated or galvanized.

Surface preparation:

  1. galvanized wire (D.A.G.)
  2. phosphate coated

Non Reactive Pre-Coatings

PANCOVER 4700

For long storage

chloride and borax free

Borax free pre-coating product for stainless steel wires, bars,tubes and profiles.

Special additives have been included to enhance the adherence to the rod/wire surface
The coating film has a low tendency to moisture pick-up enabling long storage before final use.

Surface preparation:

1. acid pickling

2. shot blasting

3.molten salts descaling

 

PANCOVER 4730

For long storage

chloride free

Special additives have been included to enhance the adherence to the rod/wire surface
The coating film has a low tendency to pick up moisture enabling long storage before final use.
This product can be used either for stainless steel or carbon steel, batch or in-line treatment, specially indicated for mattress spring wire.

Surface preparation:

1. acid pickling

2. shot blasting

3.molten salts descaling

 

PANCOVER 4750

For long storage

low borax pre-coating

Low borax pre-coating product. The coating film has a low tendency to moisture pick-up enabling long storage before final use.

Surface preparation:

1. acid pickling
2. shot blasting

 

PANCOVER 4760

To avoid the presence of boron in waste water

borax free product, special additives have been included to enhance the adherence to the rod/wire surface.

Designed to avoid the presence of boron in waste water. It can be used either on rod or fine wire.

Surface preparation:

1. acid pickling

2. shot blasting

 

PANCOVER 4770

For high humidity environment

very low hygroscopicity, low borax

Particularly indicated for high humidity enviromment.

Surface preparation:

1. acid pickling

2. shot blasting

 

PANCOVER 4780

For the in-line treatment of multi-wire coating

borax free pre-coating compound , water soluble

It is used for the in-line treatment of multi-wire coating after in-line phosphate.

Surface preparation:

  1. Shot blasting
  2. Acid pickling and phosphate coating