Dry Drawing Lubricants
PANLUBE S37
For high and medium speed drawing
Calcium lubricants
For medium drawing speed (12-16 m/s).
Surface preparation:
1. Mechanical descaling.
PANLUBE S44
For high and medium speed drawing
Calcium lubricants
For high speed (16-20 m/s)
Surface preparation:
mechanical descaling
PANLUBE S59
For high and medium speed drawing
Calcium lubricant medium fat content
Easy to be removed in the following wet drawing operation.
Surface preparation:
- mechanical descaling
PANLUBE S104
For high and medium speed drawing
calcium lubricant
High lubrication and high melting point.
Surface preparation:
- mechanical descaling
PANLUBE S466
For high and medium speed drawing
calcium-sodium lubricant medium fat content
For high drawing speed, on the first dies followed by sodium (S1285 – S1440), not suitable for further wet drawing operation.
Surface preparation:
orbital belt descaling and pre-coating (Pancover 4780) or pickled and salt coated material
PANLUBE S616
For high and medium speed drawing
calcium-sodium lubricant with low fat content
For high drawing speed, on the first dies followed by sodium (S1285 – S1440), not suitable for further wet drawing operation.
Surface preparation:
orbital belt descaling and pre-coating (Pancover 4780) or pickled and salt coated material.
PANLUBE S622
For high and medium speed drawing
calcium - sodium lubricant medium fat content
For high drawing speed, on the first dies followed by sodium (S1285 – S1440), not suitable for further wet drawing operation.
Surface preparation:
orbital belt descaling and pre-coating (Pancover 4780) or pickled and salt coated material
PANLUBE S1280
For high and medium speed drawing
low borax sodium lubricant with high content of stearic acid
For high drawing speed, on final dies in combination with S466, S55 or S244.
Surface preparation:
- mechanical descaling
- orbital belt and pre-coating
- acid pickling, lime, borax or PANCOVER coating
PANLUBE S1285
For high and medium speed drawing
borax free sodium lubricant with high content of stearic acid
For high drawing speed, on final dies in combination with S466, S55 or S244.
Surface preparation:
- mechanical descaling
- orbital belt and pre-coating
- acid pickling, lime, borax or PANCOVER coating
PANLUBE S1440
For high and medium speed drawing
low borax sodium lubricant, high melting point
For high drawing speed, on final dies in combination with S466, S55 or S244.
Surface preparation:
- mechanical descaling
- orbital belt and pre-coating
- acid pickling, lime, borax or PANCOVER coating
PANLUBE S55
For very high speed drawing
calcium lubricant low fat content
For high speed (up to 20 m/s)
Surface preparation:
- mechanical descaling
- acid pickling,lime or borax or PANCOVER coating
PANLUBE S103
For very high speed drawing
Calcium lubricant, medium fat content, high melting point
For very high speed, in combination with S55 or S44
Surface preparation:
- mechanical descaling
- belt descaling and borax or PANCOVER coating
PANLUBE S244
For very high speed drawing
calcium lubricant medium fat content
For very high drawing speed, on the first dies followed by sodium (S1285- S1440), not suitable for the further wet drawing operation.
Surface preparation:
- orbital belt descaling and pre-coating (Pancover 4780)
PANLUBE S2000
For final dies
calcium-sodium lubricant medium fat content
For final dies after a calcium lubricant (S44,S55,S59,S103)
Surface preparation:
- mechanical descaling
- acid pickling+ lime or borax or PANCOVER coating
Wet Drawing Lubricants
PANLUBE L3019
Degreasing action and resistance to acid contamination
water soluble liquid lubricant: different balance of degreasing and lubrication
Strong stability against the action of lime and calcium lubricants, excellent degreasing action to prepare the surface for the further copper coating process. Developed also to offer an excellent resistance to acid contamination and high die life of skin pass die at very high drawing speed.
Surface preparation:
After first drawing from:
- mechanically descaled rod
- mechanically descaled and PANCOVER coating
- pickled and lime or PANCOVER coating
PANLUBE L3009
Degreasing action and resistance to acid contamination
water soluble liquid lubricants: different balance of degreasing and lubrication
Strong stability against the action of lime and calcium lubricants, excellent degreasing action to prepare the surface for the further copper coating process. Developed also to offer an excellent resistance to acid contamination and high die life of skin pass die at very high drawing speed.
Surface preparation:
After first drawing from:
- mechanically descaled rod
- mechanically descaled and PANCOVER coating
- pickled and lime or PANCOVER coating
PANLUBE L3000
Degreasing action and resistance to acid contamination
water soluble liquid lubricant: different balance of degreasing and lubrication
Strong stability against the action of lime and calcium lubricants, excellent degreasing action to prepare the surface for the further copper coating process. Developed also to offer an excellent resistance to acid contamination and high die life of skin pass die at very high drawing speed.
Surface preparation:
After first drawing from:
- mechanically descaled rod
- mechanically descaled and PANCOVER coating
- pickled and lime or PANCOVER coating
PANLUBE L3110
For protection and good lubrication
protective oil for copper coated wire
It provides anti-rusting properties and good feedability in the welding gun.
For the protection and lubrication of the copper coated welding wire.
For skin pass
PANLUBE L30SP
Skin pass
Special lubricant for skin pass
Very good neutralization properties and high feedability in the welding machine.
Surface preparation:
- copper / bronzed coated
PANLUBE L3048
Skin pass
Special lubricant for skin pass
Special oil to be used for the skin pass of copper coated wire with PCD dies at high speed (up to 30 m/s).
PANLUBE S1103
Skin pass
Special lubricants for skin pass
Very good neutralization properties and high feedability in the welding machine.
Surface preparation:
- copper-bronzed coated wire
Phosphate Coatings
PANCOVER F4500A
High Coating weight, very adherent crystals
zinc phosphates accelerated with nitrate/nitrite
For general applications for cold heading and high carbon steel wire: high coating weight, very adherent crystals.
Suitable for oil and dry lubrication.
It can be used either for batch or in-line treatments.
Surface preparation:
- acid pickling
- shot blasting
PANCOVER F4501P
High Coating weight, very adherent crystals
zinc phosphates accelerated with nitrate/nitrite
For general applications for cold heading and high carbon steel wire: high coating weight, very adherent crystals.
Suitable for oil and dry lubrication.
It can be used either for batch or in-line treatments.
Surface preparation:
- acid pickling
- shot blasting
PANCOVER F4550A
For high speed drawing
zinc calcium phosphates accelerated with nitrate/nitrite
Product suitable for high speed drawing for high carbon steel wires.
Surface preparation:
- acid pickling
PANCOVER F4551P
For high speed drawing
zinc calcium phosphates accelerated with nitrate/nitrite
Product suitable for high speed drawing for high carbon steel wires.
Surface preparation:
- acid pickling
PANCOVER F4620UN
For smooth and black finish
zinc phosphates accelerated with nitrate/chlorite
Universal product for application on high and low carbon steel, on acid pickled or shot blaster rod.
Single product easy to use, very stable working conditions.
It produces a smooth and black finish on the drawn wire, it can be used fot batch or in-line operations.
Surface preparation:
- acid pickling
- shot blasting